|
The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised.
FEATURES
Install
- Connectors: Quick Disconnect Terminals (Power Terminal and Speaker Terminals)
- Terminal Layout: One-Sided
- Mounting Design: Easy Stacking and Clean-look installation
General
- Amplifier Type: Class-D (Digital)
- Channel Design: 1 Channel (Mono)
- Thermal Protection
- Low-battery Protection
- Power Supply: Resonant Mode Power Supply
- Power Supply Design: DC-DC PWM Power Supply
- Board Circuitry: STAR Circuit
- Current Protection: Auto Over-Current Protection
- Power Indicator: Top Mounted Blue LED Power/Status Indicator
- RCA Output: Non-Fading Pre-Amp Output
- Crossover: Adjustable High Pass, Low Pass
- Pre-Amp Stage: Discrete
- Final Outputs: MOSFET
- Board Design: 6-Layer Glass Epoxy PC Board
- Gain Control: Adjustable
- Bass Control: Remote Bass Control (Sold Separately)
SPECIFICATIONS
RMS Power Ratings
- Per channel into 4 Ohms: (@14.4V ≤1%THD+N) 1200W x 1
- Per channel into 2 Ohms: (@14.4V ≤1%THD+N) 1200W x 1
Sound Tuning
- Crossover: Variable, 50-400Hz (-24dB / oct ), (Variable, L.P.F Only 1/2 ch)
- Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
- Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
General
- Power Requirements: 14.4V DC (11V to 16V)
- Input Sensitivity: Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
- Cable size: 25 mm² (BATT and GND), 4 mm² (Remote), Up to 10 mm² (Speaker)
- Frequency Response: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 Ω)
- Speaker Impedance: 4 or 1 Ω
- Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 92 dBA
|
